Trading Standards Service    





Our Advice Sheets

Weighing equipment for legal use

Weighing equipment that is used for legal and trading purposes is required to be accurate and appropriate for purpose

This guidance is for England, Scotland & Wales

Weights and measures (also known as 'metrology') legislation enforced by trading standards services places requirements on weighing equipment for legal use when goods are bought, sold or produced. It covers weighing equipment that determines the final quantity of goods delivered to customers.

The legislation also applies to equipment used for weighing patients for the purpose of medical monitoring, diagnosis and treatment as well as weighing equipment used for making up medicines on prescription in pharmacies and determination of mass in analyses carried out in medical and pharmaceutical laboratories.

There are also other particular weighing applications where this legislation applies, which include the calculation of tolls, tariffs, taxes, bonuses, penalties, etc based on weight and expert opinions given in court proceedings concerning weights.

Weighing equipment used during a production process (for example, to determine the weight of ingredients) does not need to comply with this legislation, neither do check scales for consumers' use in supermarkets etc provided there is a further final weight check over an authorised, accurate and correctly marked weighing machine.

In the guide

Equipment types, uses & construction

The controls over weighing equipment depend on its type of construction and the use to which it is put. All weighing equipment that this legislation applies to must be suitable for its intended purpose in terms of its construction, weighing capacity and level of accuracy, and indicate weight correctly to within defined limits.

Weighing equipment can be either:

  • 'non-automatic' where goods are placed on them by the user and the weight indication is displayed and can be printed if required
  • 'automatic' as used in production lines where goods pass over the equipment to ensure the quantity is correct without intervention by an operator

Weighing machines for legal use have to be constructed to a particular government or European Union (EU) specification and bear particular stamps, stickers or other indications to show that the equipment complies with these requirements. The required indications have changed over the years and examples of them are outlined later in this guide.

Additionally, weights that are used in conjunction with weighing equipment must be correctly constructed and bear particular indications to show that they are suitable for legal use.

When considering using any weighing equipment for legal use it is recommended that the assistance of the local trading standards service be sought; they will be able to advise on the suitability of equipment.

Non-automatic weighing equipment

Non-automatic weighing equipment used for legal purposes must be accurate and manufactured in accordance with an approved certificate of conformity.

Non-automatic weighing instruments are either passed as 'fit for use for trade' by an inspector of weights and measures or a trading standards officer, or more commonly these days 'qualified' for legal use under EU regulations by a combination of the equipment's manufacturer or their authorised representative, and an approved body or approved qualifier officially authorised to carry out the same qualification duties.

The crown stamp, qualifier's identification stickers & other markings

When weighing equipment for legal use has been made and qualified as conforming to all manufacturing and accuracy requirements the required stamps, stickers and other indications are attached to it by the manufacturer or approved qualifier. Some equipment - weighbridges for example - is required to be tested and have its final approval stamps applied when the equipment has been installed in its place of use.

The following examples of stamps and stickers may be found on weighing equipment that has been approved for legal use:

weights and measures crown mark  The crown stamp, year of application and official number of the inspector of weights and measures who passed the equipment as fit for trade use is found on a lead plug embedded into older, traditional weighing equipment. 
weights and measures M markThe M sticker indicates that the equipment it is attached to has been manufactured in accordance with legal metrology requirements. 
weights and measures mark
weights and measures mark
The approved body sticker indicates which organisation examined and approved the equipment as being in accordance with all manufacturing and accuracy requirements.
weights and measures mark
weights and measures mark The requalification sticker indicates that the equipment has been repaired or adjusted since it was manufactured to maintain manufacturing and accuracy requirements.

As can be seen, the appearance of these stickers has changed and been varied as legislation has developed and subject to amendments over the years with more changes being introduced in future years; local trading standards services will be able to advise on the stamp and sticker requirements for particular equipment.

Approved weighing equipment is also required to bear various other indications relating to the weighing capacity, accuracy, etc as detailed on their approval certification with more modern equipment having the required information on an attached 'data plate'. The data plate commonly also includes information relating electrical rating, power consumption, etc. The data plate may also have the required stickers attached so that all required information is contained on the equipment in one easily discernible position, as illustrated below.

data plate

The accuracy of approved weighing equipment is divided into four classes and careful consideration must be given to which accuracy class should be used for particular weight determination.

Class (I) (II)
UsePrecious metals, precious stones, pharmaceutical purposes, etcGeneral weighing purposesBallast and other building materials, waste disposal and recycling purposes

Weighing equipment that has been rejected for legal use

When considering the purchase and use of second-hand weighing equipment for trade purposes one stamp or sticker to look out for is the six-pointed star.

weights and measures mark weights and measures mark weights and measures mark 

The six-pointed star stamp or sticker is applied to approved equipment that has been 'rejected' as it was found on inspection to be inaccurate or not in compliance with manufacturing requirements; it also indicates that the equipment has not since been adjusted or repaired.

It is an offence to use weighing equipment bearing a six-pointed star indication for legal purposes.

It may be possible for 'rejected' weighing equipment to be adjusted or otherwise repaired and submitted to the appropriate body for requalification.

Automatic weighing equipment

Automatic weighing machines are capable of determining or checking the weight of items without the intervention of an operator and are usually used in specialised circumstances within a production process. Their approval requirements and usage circumstances are different to non-automatic equipment and more detailed advice concerning their suitability for use can be obtained from the local trading standards service.


Weights that are required to be used in conjunction with approved weighing equipment must bear an indication that they are sufficiently accurate and have been manufactured in accordance with legal requirements.

The indication will normally be found stamped into a lead plug in the base of the weight and take the form of the traditional crown stamp or EU mark of approval.

weights and measures crown mark weight stamp 02
weight stamp e

As with weighing equipment any weights that bear a six-pointed star stamp were found to be inaccurate when they were last inspected and would be illegal for use for legal weighing purposes.

Maintenance & use of weighing equipment

Weighing equipment can give incorrect readings because of poor practice or misuse and the following points should be noted to ensure continued accuracy:

  • weighing equipment should be used on a stable, vibration free, level surface. Most equipment incorporates a level-indicator device, which must indicate that the equipment is level when in use
  • weighing equipment must be correctly balanced before use, with any indicators reading zero (on electronic weighing equipment the digital indications should not be blank prior to weighing). If the weighing equipment does not indicate zero before use incorrect readings may be given
  • strong draughts, caused by a breeze or air conditioning systems, can affect some weighing equipment and this should be considered when selecting the position the equipment will be used in
  • the weighing pan should be kept clean and free from any debris or obstructions beneath it. Build-up of debris or other material under or adjacent to the weighing pan can interfere with the accuracy of the equipment
  • regular checks of the accuracy of weighing equipment should be carried out using known quantities, such as stamped weights, to help ensure weighing equipment does not become faulty or unjust
  • a record of the checks that are carried out on weighing equipment should be kept; it must identify when they are done, the action taken, the results of the checks and who carried them out, together with any necessary remedial action taken
  • a maintenance contract with a weighing machine service company should be considered especially where weighing equipment is in constant use or very high levels of weighing accuracy need to be maintained


It is an offence to use unapproved weighing equipment for legal purposes, to make alterations to equipment after it has been approved for legal use, or to use seriously inaccurate equipment.

The maximum penalty on conviction is a fine of up to £1,000 for unapproved or altered equipment. The maximum penalty for use of seriously inaccurate equipment is an unlimited fine.

Key legislation

Please note

This information is intended for guidance; only the courts can give an authoritative interpretation of the law.

The guide's 'Key legislation' links may only show the original version of the legislation. Information on amendments to UK legislation can be found on each link's 'More Resources' tab; amendments to EU legislation are usually incorporated into the text. Amending legislation is linked to separately where it is directly related to the content of a guide. Please contact us for further information.

Last reviewed/updated: April 2015




Gloucestershire Trading Standards, The Tri-Service Centre, Waterwells Drive, Quedgeley, Gloucester GL2 2AX


For Businesses . For Consumers . Scams . News . About Us . GCC 


This page was last edited on 21/04/15